Network
Dynojet may not be the first name you think of when it comes time to accessorizing your off-road vehicle or UTV, but they make more than just dynamometers. This year they brought two new products to showcase at the SEMA Show for the off-road market.
The Gyro Vision LED light will turn when the steering wheel moves, but they can also be controlled with a joystick.
The first product had to have been one of the top products we saw at the show – Gyro Vision. Gyro Vision is a trail tracking, multi-axis off-road light that is controlled by your steering input.
The controller can be mounted anywhere in the vehicle and will be calibrated to know what level is. The controller can control up to five lights.
These lights will turn and illuminate the direction you are going in addition to having the ability to be controlled with a joystick. The lights have 30 degrees of movement in every direction, level with ascent and descent, and have a water-tight mil-spec aluminum construction. The controller can run up to five lights.
Dynojet also showcased its Power Vision CX. This is a performance tuner for the Polaris RZR that allows you to tune your RZR and watch gauges on the live screen. This product allows full tunability so that the owner of the vehicle can customize it to fit their needs. The tuner features:
- Fueling revised for maximum power and torque
- Spark timing optimized for 91-93 octane fuel
- Rev limit raised in high and low gears
- Speed limit raised in high and low gears
- Torque limiting functions reduced or eliminated
- Revised drive-by-wire throttle profiles for high and low gears
- Lower fan turn-on temps
- Left foot brake mode enabled
- Retains ADC and Turf mode where applicable
- Boost control for Turbo models
In addition to the tuning capability, the tuner can log data through the C3 software by plugging the tuner into the computer and running it on a dynamometer. For more information on Dynojet’s products be sure to check out its website.
